Advantech 5000 Series user manual Name All Analog Data, Syntax #aaSicr

Command Set		5017/5018
		Analog Input
#aaSi
Name	All Analog Data In

Description Returns the input value of all channels for a specified analog input module of a specified system in engineer- ing unit only.

Syntax	#aaSi(cr)
	# is a delimiter character.
	aa (range 00-FF) represents the 2-character hexadecimal
	address of the ADAM-5000 system you want to
	interrogate.
	Si is the I/O slot of ADAM-5000 system you want to
	read.
	(cr) is the terminating character, carriage return (0Dh)
Response	>(data)(data)(data)(data)(data)(data)(data)(data)(cr)if
	the command is valid.
	?aa(cr) if an invalid operation was entered.
	There is no response if the module detects a syntax error
	or communication error or if the specified address does
	not exist.
	> is a delimiter character indicating a valid command was
	received.
	? delimiter character indicating the command was
	invalid.

(data) is the input value in engineering units of a channel in the interrogated module of the specified system. The (data) from all channels is shown in sequence from 7 to

0.If (data) = “ ”, it means the channel is invalid. (cr) is the terminating character, carriage return (0Dh)

6-46 ADAM-5000