Oki 56801 manual Installation, Getting Started

Installation

Getting Started

To install your new fax machine, follow the instructions for the steps from Unpacking (below) to “Fax Machine Identification” on page 25. You must complete these steps for your fax machine to operate properly. If you have purchased an option package for your fax machine, refer to the documentation you received with that option.

Where to install your fax machine

–Install your fax machine in a dust-free location away from direct sunlight.

–Allow several inches on each side of the fax machine to ensure adequate ventilation.

–Make sure there are both power and telephone outlets nearby.

–Choose a location where the relative humidity is between 20% and 80%, and where the temperature is between 10°C/50°F and 32°C/90°F.

Unpacking

Before you begin, be sure that all the items listed below are included in your package. Refer to the illustrations in “Compo- nent Identification” on page 8 to identify the items. After

removing the items from the carton, place them on a sturdy sur- face.

–Fax machine unit

–Toner cartridge

–Image drum unit (inside facsimile unit)

–Power cable

–Telephone line cable

–Paper tray/Copy stacker

–This User’s Guide

Note: If any items are missing, notify your dealer immediately for a replacement. Keep your packing materials and carton in case you ever need to ship or transport the machine.

CAUTION: Do not ship the fax machine with the image drum unit and toner cartridge installed. Refer to “Ship- ping the Fax Machine” on page 73.

15