Oki 56801 manual Replacing Image Drum Unit

7.Using the cleaning wipe provided in the package with your new toner cartridge, gently wipe back and forth across the full length of the LED array.

C

RE

AU	CHA	TODIA	ART
S	R	E DIAL	TPO
	H	EHN
		YP VHOOQEUE

NFIE NROM

DE PH OEXFI LGI

		BAC
			M6
1	I	JKL		9Y
	4		T U
		7SR	O	0
		*

8.Close the copy stacker and push down until you hear the copy stacker click into place. Be sure that the cover latches on both sides.

9.Close the document table.

CAUTION: Please abide by the disposal laws of your country when disposing of replaced toner cartridges.

Replacing Image Drum Unit

If you have dirty print-outs then the image drum may have accumulated toner on it.

Press the Select Function key, then the 10/Printer Cleaning One-Touch key and then the YES key.

Your fax machine prints a cleaning page to clean the image drum. Repeat this procedure several times and then check whether you still have dirty print-outs. If this procedure does not solve the problem, your fax machine needs a new image drum unit. Contact your dealer to order one.

If the faxes you receive are light or have vertical streaks in them and you are not out of toner, or if your fax machine displays a CHANGE DRUM message, your fax machine needs a new image drum unit. Contact your dealer to order one. Refer to “Part Numbers” on page 101 for the image drum replacement part number.

The life of an image drum depends on a number of factors, including temperature and humidity, the type of paper you use, and the number of pages per job.

CAUTION: Never expose the image drum unit to light for more than 5 minutes. Never expose the image drum unit to direct sunlight. Always hold the image drum unit by the ends. Never touch the surface of the green drum inside the image drum unit.

71