Oki 56801 manual OFF, there is no effect on the ringer in telephone/fax auto switch answering mode

12:DISTINCTIVE RING: Distinctive ringing is a service offered by some telephone services that allow you to have different numbers on one line, each with its own distinctive ring. In this way, when you get an incoming call, you can identify what number is being called by the ring pattern. Your local telephone service can provide you with more information about this service and if it is available. If available, this service is usually offered as a monthly charge to your normal telephone bill. Available settings are Off, Set and On. To use this function, refer to “Setting Distinctive Ring” on page 57.

13:PAPER SIZE: This function allows you to tell your fax machine what size of paper you are using in the paper cassette and manual paper feed of your fax machine. Available settings are A4, letter, legal 13 and legal 14.

14:USER LANGUAGE: This function allows you to select among the languages programmed into your fax machine.

15:INCOMING RING: This function controls the telephone ringing sound your fax machine makes when a call comes in. When this function is set to off, your fax machine will not ring during incoming calls. When set to on, your fax machine only rings when set to manual receive mode or 11:RING RESPONSE is set to 5 to 20 seconds (except 1 ring). When set to DRC, your fax machine rings for each incoming call with the same tone, even if you have function 12:DISTINCTIVE RING set to on. Available settings are On, Off and DRC.

Note: DRC is only available if the setting of user function 12:DISTINCTIVE RING is available. Also, when set to

OFF, there is no effect on the ringer in telephone/fax auto switch answering mode.

16:REMOTE RECEIVE: When you receive an incoming call, this function allows you to remotely tell your fax machine to switch from telephone to fax mode to receive an incoming fax. To use this function, use the keypad of a handset or an external telephone to enter the remote receive number you have programmed into your fax machine. Available settings are Off, 00, 11, 22, 33, 44, 55, 66, 77, 88, 99, ** and ##. This function only works if your telephone system is a touch-tone dialing system.

17:MEM./FEEDER SW.: This function selects the transmission mode of MEM. TX (scan before sending) or FEED. TX (send each page directly from document feeder). This becomes available when 25: INSTANT DIAL is off.

19:ECM FUNCTION: The error correction mode function helps your fax machine to improve communication in areas where telephone line conditions are poor. Available settings are On and Off.

Note: When using ECM, the transmitting fax machine automatically checks the data as it is sent. If the receiving fax machine cannot verify the transmission, the transmitting fax machine will retransmit as necessary. Using ECM also increases transmission time because the data is checked as it is transmitted.

Not all fax machines have ECM. If you have activated ECM and then transmit to a fax machine not using ECM,

55