Oki 56801 manual Using Voice Request, Initiating Voice Request

4. Adjust the paper guides on the manual paper feeder.

5.Insert a sheet of paper face up, adjusting the guides again to ensure the paper is straight.

6. Press the COPY key.

Note: It is recommended to make single copies only when using the manual paper feed slot. This will prevent any possible paper feed jams from occurring.

Using Voice Request

The voice request feature allows you to have a conversation with a person at a remote fax machine during a fax communication. Either the sender or receiver can initiate a voice request.

If you are sending a fax, you can answer a voice request only after all pages have been transmitted. If you are receiving a fax, you can answer a voice request after reception of each page. You will know if the person on the other fax machine has issued a voice request when you hear a warbling tone. If you do not respond in approximately six seconds, the voice request is automatically cancelled.

Note: You need to have either an attached handset or an external telephone to use the voice request function.

With the ITU-T V.34 modem, this feature can’t be used.

This function can only be used during Feeder-TX.

Initiating Voice Request

1.During a fax communication, press the Hook/V. Request key.

2.When the other party answers your request, your fax machine will emit a repetitive warbling sound. The display

shows LIFT HANDSET AND PRESS VOICE REQUEST.

3.Lift your handset and press the Hook/V. Request key.

Note : If you press your Hook/V. Request key to initiate a voice request during transmission, but no one is there to answer,

41