Oki 56801 manual Dial Parameter Settings, happens, follow the above instructions again

6. Press the YES key. The display changes to SETUP FAX RING,

CALL FAX NUMBER NOW.

7.Using a separate telephone line, immediately dial the number assigned to the fax machine (you must do this within 90 seconds). When your fax machine begins to ring, the

display changes to AUTO DETECTING, RING PATTERN.

8.Your fax machine then automatically detects and remembers its assigned ring pattern. When your fax machine has

finished programming its ring pattern, the display shows

DISTINCTIVE RING SET, RESULT=OK. After detecting and

remembering the ring pattern, the display changes to

DISTINCTIVE RING, [ON].

9.Press the YES key to confirm your selection.

10.Press the Select Function key to finish.

Note: Occasionally, your fax machine may not be able to detect the ring pattern on its first try. If this happens, the display

changes to DISTINCTIVE RING SET, RESULT=NG. If this

happens, follow the above instructions again.

Dial Parameter Settings

These functions allow you to control the way your fax machine dials telephone numbers. Refer to Dial Parameter Settings List to determine which settings you may need to change, then refer to “Changing Dial Parameter Settings” on page 59 to make the change.

Note: Some settings are not available in some countries. If you have trouble accessing a dial parameter setting listed here, contact your dealer for assistance.

Dial Parameter Settings List

REDIAL TRIES: This function controls how many times your fax machine automatically redials a number which is busy or which does not answer. Available settings are from 0 to 10 tries. (In FRE, the available settings are 1-5 tries.)

REDIAL INTERVAL: The function controls how long your fax machine waits between each automatic redial attempt. Avail- able settings are from 1 to 6 minutes. (In FRE, the available set- tings are 1-12 minutes.)

DIAL TONE DETECT: This function allows your fax machine to wait for and detect a dial tone before proceeding with dial- ing. Available settings are on and off.

BUSY TONE DETECT: This function allows your fax machine to detect a busy tone when sending a fax. Available settings are on and off.

MF(TONE)/DP(PULSE): This function controls what method your fax machine uses for dialing. Two dialing methods are in common use. DP, or dial pulse dialing, uses monotone pulses to dial a number (like a rotary telephone). MF, or multi-frequency dialing (touch-tone), uses different tones to dial a number.

Available settings are MF and DP.

MF(TONE) DURATION: If your fax machine is set to tone dial- ing, this function controls the duration of the tones used for

58