Oki 56801 manual Relay Broadcasting, Initiating Relay Broadcasts, Relay Key Station

6.Using the numeric keypad, enter the 4-digit password for the mailbox you want to print from.

7.Press the YES key. The message begins printing.

Note: If you want to clear the mailbox without waiting for printing, press the Stop key at this point. The display changes to CANCEL? Press the YES key to clear the mailbox.

Relay Broadcasting

Relay broadcasting is where one fax machine, which is the relay initiating station, sends a document to another fax machine. The receiving fax machine, which is the relay key station, then re- sends (broadcasts) the document to a number of other locations.

Remote List Number: These numbers (up to 20 digits) are the code numbers of locations or groups of locations programmed into the relay key station.

Relay Key Station

The relay key station is the fax machine that receives the origi- nal fax message, and then automatically relay broadcasts the message to other remote fax machines. For this feature to be available, the fax machine operating as a relay key station must be able to receive and relay broadcast the message to other fax machines (OKIFAX 2600, 5750, 5950, 5980, or fax of another maker with a SUB PWD relay function).

Initiating Relay Broadcasts

Relay Initiating Station

Your fax machine can act as the relay initiating station, which starts the relay broadcast by sending the original documents. Before programming your fax machine to initiate a relay broad-

SELECT

FUNCTION

4/EF

RELAY

INIT. TX

4: RELAY PASSWORD

cast, you will need to obtain the following information from the operator of the fax machine you intend to use as a relay key sta- tion:

Note: The designated recipient of the receipt report sent by the relay station (function in which the relay station sends a report on transmission results to the destination specified by the relay initiating station) shall be the destination programmed into Auto-Dial number 150.

Relay Password: This is the relay password (up to 20 digits) which is programmed into the relay key station.

1.Load your document.

2.Press the Select Function key.

3.Press the 4/Relay Initiate TX One-Touch key. The display

shows RELAY PASSWORD.

4.Using the numeric keypad, enter the password from the hub relay station (up to 20 digits).

5.Press the Start key. The display shows REMOTE LIST NO.

6.Using the numeric keypad, enter the remote list number.

48