Oki 56801 manual Physical Data, Fire and Explosion Hazard Data, Explosion Data

CAS# 1333-86-4

OSHA TWA 3.5 mg/m3

ACGIH TLV 3.5 mg/m3

Polypropylene (less than 3% by weight)

CAS# 9003-07-0

OSHA TWA 15 mg/m3 for total dust

ACGIH TLV 10 mg/m3 for total dust

Amorphous Fumed Silica (less than 1% by weight)

CAS# 67762-90-7

OSHA PEL 15.0 mg/m3 for total dust

ACGIH TLV 10.0 mg/m3 for total dust

Note: This product is not regulated under Section 313 of SARA, Title III.

Physical Data

Physical State: Solid

Melting/Freezing Point: 230°F (110°C) / Not available

Boiling Point: Not applicable

PH: Not available

Vapor Pressure: Not applicable

Vapor Density (Air=1): Not available

Evaporation Rate (Butyl Acetate=1): Not available

Specific Gravity (H2O=1): 1.15

Solubility in water: Negligible

Solubility in solvents: Not available

Coefficient of water/oil Distribution: Not available

Appearance and odor: Black granules, no odor

Odor Threshold: Not available

Fire and Explosion Hazard Data

Flammability: Not flammable under conditions of use.

Extinguishing Media: In case of fire, use extinguishing media (water spray, CO2, foam, dry chemicals). When in a machine, treat as an electrical fire.

Flash Point (ºC): Not applicable

Lower Explosive Limit: 60 g/m3

Upper Explosive Limit: Not applicable

Auto-ignition Temperature: Not applicable

Hazardous Combustion Products: Not applicable

Explosion Data

Like most organic materials in powder form, it can form explosive mixtures when dispersed in air.

Sensitivity to Mechanical Impact: Not available

Sensitivity to Static Discharge: Not available

105