Oki 56801 manual Press the Start key

To do this	Use
Enter Pause (i.e., to wait for	Pause One-Touch key
long distance or outside
lines)
Add a switch from pulse to	*/Tone key
tone dialing for part of the
call
Enter Plus	Plus One-Touch key
Delete	Delete One-Touch key
Caps	Caps One-Touch key
Move the cursor to make	YES and NO keys.
corrections

4.Press the Start key.

5.Enter the Location ID. This is a descriptive title up to 15 characters long. Refer to the instructions below.

To do this	Use
Enter Numbers	Numeric keypad (press once)
Enter Spaces	Space One-Touch key
Enter Hyphens	Hyphen One-Touch key
Enter Pause	Pause One-Touch key
Enter Plus	Plus One-Touch key
Delete	Delete One-Touch key
Caps	Caps One-Touch key
Enter alphabet characters	Locate the character you want on the numeric keypad.
	Press that key repeatedly until the character appears. It
	is also possible to input characters using One-Touch
	keys.

To do this	Use
Enter unique character	Press the 0/Unique key repeatedly until the character
	you want appears. The following characters are
	available:
	! # & ‘ ( ) * + , - . / : ; = ? · @ \ “ _ % ˜ ä ß ñ ö ü Æ Å Ø
	æ å ø.
	Note: Some unique characters can be entered using
	one-touch keys.
Enter two letters using the	Press the NO key to move to the next character.
same key.
Move the cursor to make	YES and NO keys.
corrections

6.Press the Start key. The display shows NO=<OR LOCATION>.

7.If an alternate fax number is required, refer to the instructions following Step 3. If no alternate number is required, continue with the next step.

8.Press the Start key. The machine displays G3 COMMUN.

SPEED.[33.6K] YES (<-) NO (->).

9.Select with the NO key and then press the YES key.

10.G3 ECHO PROTECTION [ON] YES (<-) NO (->) is displayed.

Select and press the YES key.

11.Press the Start key to finish programming the One-Touch key. The display shows LOCATION PROGRAMMING.

12.To continue programming One-Touch keys, go back to Step 2. If you are finished programming, press the Select Function key.

30