Oki 56801 manual When Whole is selected, the first page is added at a reduced size

•When Part. is selected, the common header of the first page is added in original size.

•When Whole is selected, the first page is added at a reduced size.

05:SENDER ID: This function controls the printing of the Sender ID of your fax machine on the faxes you send. When turned on, your Sender ID, date and time will be printed on each page slightly outside the image area of your document. When turned off, your Sender ID, date and time will not be printed. However, some fax machines will print your TSI/CSI.

06:MONITOR VOLUME: This function sets the volume your fax machine uses for telephone line monitoring sounds during dialing. Available settings are Off, Low, Middle, High Middle and High.

07:BUZZER VOLUME: This function sets the volume of the various beep and alarm tones your fax machine emits during operations. Available settings are Low, Middle and High.

08:CLOSED NETWORK: This function allows you to program your fax machine to refuse to receive faxes from or transmit faxes to locations whose telephone numbers have not been programmed into the One-Touch keys or Auto Dial numbers of your fax machine. Using this function, you can set up a closed network of fax machines. If you do not want your fax machine to transmit faxes to or receive faxes from locations outside your network, select T/R. If you only want your fax machine to refuse to receive faxes from outside your network, select RX. Available settings are OFF, T/R and RX.

09:TX MODE DEFAULT: This function allows you to change default type of original, transmit and copy resolution settings of your fax machine. Unless you select otherwise using the Transmit Resolution/YES or Type of Original/NO keys, your fax machine is set to use the STD and NORMAL settings. If you are constantly sending faxes, which require some other combination of transmission modes, use this function setting to change the default transmission modes to any other combination of settings. While you are programming, the new default combinations will appear on the LEDs above the Transmit Resolution/YES or Type of Original/NO keys.

10:T/F TIMER PRG.: When set to the telephone/ fax answering mode, your fax machine automatically distinguishes between incoming voice and fax calls. If the incoming call is a voice call, your fax machine will ring to tell you to pick up the handset. If you do not answer, your fax machine automatically switches back to facsimile mode to allow the calling party to send a fax. The T/F TIMER function controls how long your fax machine waits before switching back to fax mode. Available settings are 20 seconds or 35 seconds.

11:RING RESPONSE: This function controls how long your fax machine waits before answering an incoming telephone call when your fax machine is set to auto receive or telephone/fax auto switch answering modes. The available settings are 1 ring, 5 seconds, 10 seconds, 15 seconds or 20 seconds.

Note: If your fax machine is set to telephone/fax auto switch answering mode, it is recommended that you set ring response to one ring.

54