Useful Information
Error messages
Display message
Base no power
or
No link.
or
No link.
Busy
Call phone company for your access #
Check tel line
Error!!
Invalid
Requires subscription to Caller ID.
Use rechargeable battery.
Cause/solution
RThe handset has lost communication with the base unit. Move closer to the base unit and try again.
RUnplug the base unit’s AC adaptor to reset the unit. Reconnect the adaptor and try again.
RThe handset’s registration may have been canceled.
RWhen “No link.” is displayed during a power failure, place a handset on the base unit to supply power to the base unit.
RThe called unit is in use.
ROther units are in use and the system is busy. Try again later.
RThe handset you are using is too far from the base unit. Move closer and try again.
RYou have not stored the voice mail access number. Store the number (page 47).
RThe supplied telephone line cord has not been connected yet or not connected properly. Check the connections (page 10).
RRecording was too short. Try again.
RThere is no handset registered to the base unit matching the handset number you entered.
RThe handset is not registered to the base unit. Register the handset (page 35).
RYou must subscribe to a Caller ID service. Once you receive caller information after subscribing to a Caller ID service, this message will not be displayed.
RA wrong type of battery such as Alkaline or Manganese was inserted. Use only the rechargeable
52For assistance, please visit http://www.panasonic.com/help