Useful Information
Wall mounting
The base unit can be mounted on a wall by changing the wall mounting adaptor’s position.
Note:
RMake sure that the wall and the fixing method are strong enough to support the weight of the unit.
3Insert the lower tabs of the adaptor into the unit’s bottom slots (A), then insert by pushing down the levers of the adaptor into the upper slots (B).
R The words “UP WALL” should be facing up.
Base unit
B
B
1To remove the wall mounting adaptor, push down the release levers (A). Remove the adaptor (B).
B B
A A
2A Turn the adaptor so that the words “UP WALL” are facing up.
B Tuck the telephone line cord inside the wall mounting adaptor.
C Connect the AC adaptor cord and telephone line cord.
3
Hook
1 2
A A
4Mount the unit on a wall then slide down to secure in place.
1
83 mm
(31/4 inches) or
102 mm (4 inches)
| 2 |
Wall phone plate |
|
83 mm | 102 mm |
(31/4 inches) 1 | (4 inches) |
2 |
|
Charger
Drive the screws (not supplied) into the wall.
27.2 mm
(1/ inches) 16
Screws
For assistance, please visit http://www.panasonic.com/help | 51 |
