Appendix F
Besides, following tips just for your reference.
•The shield of cable can’t be used for signal ground.
The shield is just designed for adhering noise, so the environment noise will couple and interfere your system when you use the shield as signal ground.
•The density of shield is the higher the better, especially for commu- nication network.
•Use double isolated cable for communication network / AI / AO.
•Both sides of shields should be connected to their frame while inside the device. (for EMI consideration)
•Don’t strip off too long of plastic cover for solderinF.
2.2System Shielding
Figure F-11 :System Shielding
|
