Chapter 2

Figure 2-6ADAM-5000E Rail mountings

2.5Wiring and Conections

This section provides basic information on wiring the power supply and I/O units, and on connecting the network.

DC Power Supply Unit Wiring

Be sure that the DC power supply voltage remains within the allowed fluctuation range of between 10 to 30 VDC. Terminals +VS and GND are for power supply wiring.

Note: The wire(s) used should be at least 2mm2.

ADAM-5000

2-9

Page 24
Image 24
Advantech 5000 Series user manual Wiring and Conections, DC Power Supply Unit Wiring