Advantech 5000 Series user manual Chapter Alarm Setting, Digital Filter

Chapter 5

5.1.12 Alarm Setting

•Set the alarm status, high alarm value, low alarm value, and then click the Update button.

•Alarm setting: Disables or enables the alarm either in Latching or Momentary mode.

•High alarm value: Downloads the high alarm limit value into the module. The format is always in engineering units.

•Lowalarmvalue: Downloads the low alarm limit value into the module. The format is always in engineering units.

Digital Filter

•High level voltage: Set the high trigger level for non-isolated input signals. The range is from 0.1 V to 5.0 V. This high trigger level must be higher than the low trigger level at all times.

ADAM-5000 5-19