
| Chapter 6 |
$aaSiCj7 |
|
Name | Read Overflow Flag |
Description | The command requests the addressed module to |
| return the status of the overflow flag of counter. |
Syntax | $aaSi7(cr) |
| $ is a delimiter character. |
| aa (range |
| address of the |
| Si identifies the I/O slot i (i : 0 to 3). |
| 7 is the command for the last value readback. |
Response | !aaff ff ff ff(cr) if the command is valid. |
| ?aa(cr) if an invalid operation was entered. |
| There is no response if the module detects a syntax error |
| or communication error or if the specified address does |
| not exist. |
| ! delimiter character indicating a valid command was |
| received. |
| ? delimiter character indicating the command was |
| invalid. |
| aa (range |
| address of an |
| ffffffff is the number of overflow for a specified channel. |
| (ffffffff represents 0~3 channels, each of which is |
| represented by one ff). |
| (cr) is the terminating character, carriage return (0Dh) |
Note: When this command is issued, the overflow value is cleared and starts afresh.