Advantech 5000 Series user manual Syntax $aaSiCjScr

	5013/5017/5017H/5017UH/5018
Command Set		Analog Input Alarm
$aaSiCjS
Name	Read Alarm Status
Description Reads whether an alarm occurred for the specified input
	channel in the specified ADAM-5000 system
Syntax	$aaSiCjS(cr)
	$ is a delimiter character.
	aa (range 00-FF) represents the 2-character hexadecimal
	address of an ADAM-5000 system.
	SiCj identifies the desired slot i (i : 0 to 3) and the
	desired analog input channel j (j : 0 to 7).
	S is the Read Alarm Status command.
	(cr) represents terminating character, carriage return
	(0Dh)
Response	!aahl(cr) if the command was valid
	There is no response if the system detects a syntax error
	or communication error or if the specified address does
	not exist.

! delimiter character indicating a valid command was received.

aa represents the 2-character hexadecimal address of the corresponding ADAM-5000 system.

h represents the status of High alarm. ‘1’ means the High alarm occurred, ‘0’ means it did not occur.

l represents the status of Low alarm. ‘1’ means the Low alarm occurred, ‘0’ means it did not occur.

(cr) represents terminating character, carriage return (0Dh)

6-88 ADAM-5000