Advantech 5000 Series user manual Name RTD Span Calibration, Syntax $aaSi0cr

Command Set		5013 RTD Input
$aaSi0
Name	RTD Span Calibration

Description Calibrates a specified RTD input module of a specified system to correct for gain errors.

Syntax $aaSi0(cr)

$ is a delimiter character.

aa(range 00-FF) represents the 2-character hexadecimal address of the ADAM-5000 system which contains the RTD module.

Si identifies the slot i (i:0 to 3) containing the RTD module to be calibrated.

0 represents the span calibration command.

(cr) is the terminating character, carriage return (0Dh). Response. !aa(cr) if the command is valid.

?aa(cr) if an invalid operation was entered.

There is no response if the module detects a syntax error or communication error or if the specified address does not exist.

>delimiter character indicating a valid command was received.

?delimiter character indicating the command was invalid.

aa(range 00-FF) represents the 2-character hexadecimal address of an ADAM-5000 system.

(cr) is the terminating character, carriage return (0Dh).

6-34 ADAM-5000