5013/5017/5017H/5017UH/5018/5018P

Command Set			Analog Input Alarm
	5013/5017/5017H/5017UH/5018/5018P

	$aaSiCjAhs
	Name	Set Alarm Mode
	Description Sets the High/Low alarm of the specified input channel
		in the addressed ADAM-5000 system to either Latching
		or Momentary mode.
	Syntax	$aaSiCjAhs(cr)
		$ is a delimiter character.
		aa (range 00-FF) represents the 2-character hexadecimal
		address of anADAM-5000 system.
		SiCj identifies the desired slot i (i : 0 to 3) and the
		desired channel j (j : 0 to 7).
		Ahs is the Set Alarm Mode command.
		h indicates alarm type and can have the value H = High
		alarm, L = Low alarm
		s indicates alarm mode and can have the value M =
		Momentary mode, L = Latching mode
		(cr) represents terminating character, carriage return
		(0Dh)
	Response	!aa(cr) if the command was valid
		There is no response if the system detects a syntax error
		or communication error or if the specified address does
		not exist.
		! delimiter character indicating a valid command was
		received.
		aa represents the 2-character hexadecimal address of the
		corresponding ADAM-5000 system.
		(cr) represents terminating character, carriage return
		(0Dh)

6-72			ADAM-5000

Advantech 5000 Series user manual 5013/5017/5017H/5017UH/5018/5018P, Syntax $aaSiCjAhscr