Advantech 5000 Series user manual Syntax $aaSiCjAhEscr

Command Set		Analog Input Alarm
5013/5017/5017H/5017UH/5018/5018P
$aaSiCjAhEs
Name	Enable/Disable Alarm
Description Enables/Disables the High/Low alarm of the
	specified input channel in the addressed
	ADAM-5000 system
Syntax	$aaSiCjAhEs(cr)
	$ is a delimiter character.
	aa (range 00-FF) represents the 2-character hexadecimal
	address of an ADAM-5000 system.
	SiCj identifies the desired slot i (i : 0 to 3) and the
	desired channel j (j : 0 to 7).
	AhEs is the Set Alarm Mode command.
	h indicates alarm type and can have the value H = High
	alarm, L = Low alarm
	s indicates alarm enable/disable and can have the value
	E = Enable, D = Disable
	(cr) represents terminating character, carriage return
	(0Dh)
Response	!aa(cr) if the command was valid
	There is no response if the system detects a syntax error
	or communication error or if the specified address does
	not exist.

! delimiter character indicating a valid command was received.

aa represents the 2-character hexadecimal address of the corresponding ADAM-5000 system.

(cr) represents terminating character, carriage return (0Dh)

6-76 ADAM-5000