Advantech 5000 Series user manual $aaSiCjrrFF, Syntax $aaSiCjArrFF

Chapter 6

$aaSiCjrrFF

Name Set Input Range

Description Sets the input range for a specified channel of a speci- fied analog input module in a specified system.

Syntax	$aaSiCjArrFF
	$ is a delimiter character.
	aa (range 00-FF) represents the 2-character hexadecimal
	address of the ADAM-5000 system you want to
	configure.
	SiCj identifies the slot i (i:0 to 3) of the ADAM-5000
	system and the channel j (j:0 to 7) of the ADAM-5017H
	/ 5017UH whose range you want to set.
	A represents the set input range command.
	rr represents the 2-character hexadecimal code of the
	input range. (See Appendix B)
Note:	Each channel in a ADAM-5017H / 5017UH module may
	be set to a different range, but the data formats of all
	channels in this module must be the same.
	(cr) is the terminating character, carriage return (0Dh).
Response	!aa(cr) if the command is valid.
	?aa(cr) if an invalid operation was entered.
	There is no response if the module detects a syntax error
	or communication error or if the specified address does
	not exist.
	! delimiter character indicating a valid command was
	received.
	? delimiter character indicating the command was
	invalid.
	aa (range 00-FF) represents the 2-character hexadecimal
ADAM-5000	6-59