Software Utilities
5.1.8 Load Module’s Configuration File
•Reload previous settings. Sets the input range, baud rate, data format, checksum status and/or integration time and alarm status for a specified analog input module.
•Sets the output range, baud rate, data format, checksum status and slew rate for a specified analog output module.
•Sets the baud rate and checksum status for a digital I/O module.
•Sets the input mode, baud rate, checksum status and/or frequency gate time, input signal mode, gate mode, alarm status, etc. for a specified counter/frequency module.
Note: Baud rate and checksum can only be changed in the INIT* state. Changed settings can only take effect after a module is rebooted.
There are three ways to load a configuration file:
1.Click the Toolbar button:
2.Click the right mouse button:
