Advantech 5000 Series user manual Syntax $aaSiØdatacr

Chapter 6

$aaSiØ(data)

Name Set Digital filter Scale

Description Set the filter seconds to start to measure the input signal.

Syntax	$aaSiØ(data)(cr)
	$ is a delimiter character.
	aa (range 00-FF) represents the 2-character hexadecimal
	address of the ADAM-5000 system which is to be
	calibrate.
	Si identifies the sepcified slot.
	Ø is the command for setting digital filter scale.
	(data) represents filter secends from 8µs~65000 µs. Be
	aware that (data) has 5 characters.
	(cr) is the terminating character, carriage return (0Dh)
Response	!aa(cr) if the command is valid.
	?aa(cr) if an invalid operation was entered.
	There is no response if the module detects a syntax error
	or communication error or if the specified address does
	not exists.
	! delimiter character indicating a valid command was
	received.
	? delimiter character indicating the command was
	invalid.
	aa (range 00-FF) represents the 2-character hexadecimal
	address of an ADAM-5000 system.
	(cr) is the terminating character, carriage return (0Dh)

ADAM-5000 6-131