Advantech 5000 Series user manual Syntax $aa5cr

Chapter 6

$aa5

	Name	Reset Status
	Description Checks the reset status of the addressed ADAM-5000
		system to see whether it has been reset since the last
		Reset Status command was issued to the ADAM-5000
		system.
	Syntax	$aa5(cr)
		$ is a delimiter character.
		aa (range 00-FF) represents the 2-character hexadecimal
		address of the ADAM-5000 system whose Reset Status
		is to be returned.
		5 is the Reset Status command.
		(cr) is the terminating character, carriage return (0Dh)
	Response	!aas(cr) if the command is valid.
		?aa(cr) if an invalid operation was entered.
		There is no response if the module detects a syntax error
		or communication error or if the specified address does
		not exist.
		! delimiter character indicating a valid command was
		received.
		? delimiter character indicating the command was
		invalid.
		aa (range 00-FF) represents the 2-character hexadecimal
		address of an ADAM-5000 system.
		s represents the Status bit that is returned by the
		ADAM-5000 system. If s=1, the system has been
		reset or powered up since the last time it was issued a
		Reset Status command. If s=0, the system has not been
		reset.
		(cr) is the terminating character, carriage return (0Dh)
ADAM-5000		6-15