A&D HV-G Series instruction manual Switch to display the HI

Step 8	Press the	MODE	switch to display the HI,
	flashing, (of the final value).
Step 9	Set the final value using the following
	switches:-
	^ switch	Selecting the value of a digit.
	< switch	Selecting a digit.
Step 10	Press the			switch to store the new
		ENTER
	parameter	and		display the blinking OK
	(of preliminary value).

Step 11	Set the preliminary value using the following
	switches.
	^ switch	Selecting the value of a digit.
	< switch	Selecting a digit.
Step 12	Press the	ENTER	switch to store the new
	parameter and display the blinking LO
	(of zero band).

Step 13 Set a zero band which is greater than the

tare value, using the following switches.

^ switch	Selecting the value of a digit.
< switch	Selecting a digit.

Step 14 Press the ENTER switch to store the new parameter and display the weighing mode.

HV-G Instruction Manual Page 35