A&D HV-G Series instruction manual Disassembly, Installation

Installation of OP-06

Caution

This option cannot be used with type L (Liquid Crystal Display) scales.

Packed with the option OP-06 are the following items which are used to install the printer into your scale.

Reference No.	Description	Quantity
6	Printer cover	1
7	Printer unit	1
8	Printer control board	1
a	Self tapping screw	3
b	Screw with washer	4
	Paper roll (PP-156)	1
	Spare ink ribbon (ERC-05)	1

Installation Method

1.Disassembly

a)Disconnect the scale power plug from the AC mains supply socket.

b)Loosen the lock screws and remove the rear cover unit (Item 3)

c)Loosen 4 x screws (Item c) and remove the upper case unit.

d)Remove 2 screws (Item a) and remove the Battery Cover.

2.Installation

(a)Connect CN2, of the printer board (Item 8), to J5 on the main board (Item 1)

(b)Install the printer board (Item 8) to the 4 stand-offs on the board on the upper case (Item 1).

(c)Secure the printer unit (Item 7) to the upper case (Item 1).

(d)Connect the printer unit cable to CN4 on the printer board (Item 8).

HV-G Instruction Manual Page 63