Hardware Installation
The AT&T WGS includes the system module (chassis) with keyboard, a single 3
For an AUDIX Voice Power 2.1.1 system to function, a minimum of 8 MB of memory is required. All AUDIX Voice Power systems require a hard disk with a minimum capacity of 68 MB. If you need to increase the system memory, please see the instructions provided in lnstalling Additional Memory in Chapter 2, Hardware Installation. If you must replace the hard disk, please see the service manual user’s guide for the appropriate WGS model.
N O T E :
If your system requires a second hard disk for expanded speech storage, please refer to Appendix A for installation information.
Memory expansion kits that increase system memory to a total of 8 MB may be installed on the motherboard or a special memory circuit board.
The following circuit boards may be installed in the system module:
■one to three IVP4
■DCP circuit board (integrated AUDIX Voice Power with System 75 switch configuration only)
N O T E :
In order to use a DCP board, a DCP port on the switch is necessary. A port on an existing board maybe used if one is available. Otherwise, an additional DCP board must be installed in the switch.
■Video Display Controller (VDC600) board (except on 8386/SX WGS)
