Appendix A: Installing a Second Hard Disk
Installing the Second Hard Disk
The procedure for installing the second hard disk is outlined below. The exact procedure for each step is included in the step or described elsewhere in this document.
1.If this is a new installation and installation has not yet been completed, skip this step. Otherwise, use the Backing Up Administrative Files procedure found in Chapter 5 to back up all files in the following directories:
/usr/vmdb
/usr/ocdb
/avp/data /gendb
2.If this is a new installation and installation has not yet been completed, skip this step. Otherwise, use the Backing Up Speech Files procedure found in Chapter 5 to back up the following speech files:
talkfile 46 phrase all talkfile 47 phrase all
3.Install the second hard disk. Follow the instructions packed with the disk or in the appropriate Service Manual.
4.Change the setup parameters to indicate that there are two hard disks. Use the Configuration: the Setup Utility procedure in Chapter 2 and change the entry for Hard Disk #2 to match the entry for Hard Disk #l. (Both should be 300 MB disks.)
