Software Installation

3.Press (Enter) to proceed with the installation. The system prompts you with the message:

Is this a new installation or a release upgrade to your existing system? (Strike 'n' (new) or 'u' (upgrade) followed by ENTER)

4.Type n and press (Enter).

The system prompts you with the message:

WARNING : A new installation of the UNIX System will destroy all files currently on the system. Do you wish to continue (y or n)?

5.Type Y and press (Enter).

The system prompts you to partition the hard disk with the following messages:

Total hard disk size is xxxx cylinders Cylinders

Partition Status Type Start End Length

---------= = = = = = ===== ===== === ======

THERE ARE NO PARTITIONS CURRENTLY DEFINED. SELECT ONE OF THE FOLLOWING:

1.Create a partition

2.Change Active (Boot from) partition

3.Delete a partition

%

= = =

4.Exit (Update disk configuration and exit )

5.Cancel (Exit without updating disk configuration)

Enter Selection: 1

3-5

Page 91
Image 91
AT&T 2.1.1 manual Create a partition