AT&T 2.1.1 manual System Diagram, T E

Introduction

Check that the following software is included if you are doing a system upgrade.

DescriptionCheck

AUDIX Voice Power Upgrade Utility R1.0

(if you are upgrading from AUDIX Voice Power R1.1 )

AUDIX Voice Power Application Software, R2.0

(If you are upgrading from AUDIX Voice Power R1.1 )

N O T E :

For integrated System 75 and DEFINlTY G1 configurations only, a DCP (or PC/PBX) board is required along with a port on a TN-754 board at the switch. If no existing port is available, an additional TN-754 board must be installed in the switch.

For additional information, please see the AT&T AUDIX™ Voice Power Switch Notes for your telephone switch.

System Diagram

Figure 1-1is a representation of an AUDIX Voice Power system configuration.

1-6