Configuration Testing and Troubleshooting
7. Press [F3] (SAVE) to begin execution.
The system searches for dial tones (Loop Current) on the boards and then informs you if the IVP4 board passes the test. If the IVP4 board fails, you must replace the board. If neither dial tones nor loop current is found, check the phone line connections.
8.Press [F6] (CANCEL) repeatedly until the main FACE menu appears.
9.Select Exit to return to the login prompt.
Application Operation Problems
This section assists you in identifying and locating problems that occur with the application rather than with the hardware. If a symptom in the “Trouble Indication” column occurs, check the solution given in the “User Response” column.
If problems continue, contact a field service representative for assistance.
