Software Installation
11.Select Exit and press [0].
12.Press [F3] (CONT) to return to the UNIX operating system.
13.At the # prompt, type installpkg and press (Enter).
For systems with an installed tape drive:
— The system displays
Please indicate the installation medium you intend to use.
Strike C to install from CARTRIDGE TAPE or F to install from FLOPPY DISKETTE.
Strike ESC to stop.
— Type f.
For systems with more than one floppy disk drive:
— The system displays
This system has two floppy drives. Strike ENTER to install from drive 0 or 1 to install from drive 1.
—Type 1 and press (Enter) to select drive 1, or just press (Enter) to select drive 0.
N O T E:
If the system configuration includes a tape drive or multiple floppy disk drives, additional prompts may appear. Use the preceding steps as a guide to responding to the system prompts. The actual prompts may vary depending on the system configuration.
14.Insert the Remote Terminal Package disk into the floppy disk drive and press (Enter). (This is a UNIX system package that comes with the UNIX Operating System Foundation Set).
