Specifications, NetBotz Rack Monitor 200 NBRK0200

Specifications

Input voltage, nominal, for AC Line Inlet	100–240 Vac; 50/60 Hz
Maximum total current draw for AC Line Inlet	10 A (defined by Switched Outlet load + 0.25 A)

Maximum output voltage for Switched Outlet	Defined by input voltage
Maximum output current for Switched Outlet	10 A (defined by Switched Outlet load)

Voltage for Voltage Output contacts	12 Vdc, 24 Vdc
Current for Voltage Output contacts	75 mA total for 12 V or 24 V load

Current capacity of Relay Output contacts	1 A, 30 V AC/DC (rated for Class 2 circuits only)

Physical

Dimensions (H x W x D)	44.2 x 432.0 x 44.2 mm (1.74 x 17.00 x 1.74 in)
Shipping dimensions (H x W x D)	67 x 450 x 225 mm (2.6 x 17.8 x 8.9 in)

Weight	1.10 kg (2.50 lb)
Shipping weight	2.70 kg (6.00 lb)
Environmental

Elevation (above MSL)
Operating	0 to 3000 m (0 to 10,000 ft)
Storage	0 to 15 000 m (0 to 50,000 ft)
Temperature
Operating	0 to 45ºC (32 to 113°F)
Storage	–15 to 65°C (5 to 149°F)
Humidity
Operating	0 to 95%, non-condensing
Storage	0 to 95%, non-condensing

Performance

Typical Rack Monitor 200 response time for dry	200 mS
contact sensor or door switch sensor state changes

Compliance

Approvals	CE, C-UL tested to CSA C22.2 No. 60950-1-3, UL
	60950-1, FCC Part 15 Class A, ICES-003 Class A,
	VCCI Class A, EN 55022 Class A, EN 55024,
	EN 61000-3-2, EN 61000-3-3, AS/NZS CISPR 22,
	VDE tested to EN 60950–1

NetBotz Rack Monitor 200 Installation and Quick Configuration Manual