How to Connect an Alarm Beacon and Other Optional Devices
1. To install an alarm beacon:
– Mount the alarm beacon in a visible position either on the roof of the rack or inside the rack.
– Route the alarm beacon cable to the Rack Monitor 200. The alarm beacon cable may be extended to a maximum of 100 m (300 ft), using
– Connect the cable to the Beacon port. 2. Connect one device to the Voltage Output.
Caution: The Relay Output is rated for Class 2 circuits only.
3.Connect one device to the Relay Output.
4.Connect a device to the Switched Outlet.
NetBotz Rack Monitor 200 Installation and Quick Configuration Manual | 11 |
