Software Installation
■Interrupts
—The system displays
Select interrupt number for TR boards.
Press <Enter> for default value
[2]or one of [2, 3, 5,or 15] or q to quit.
—Press (Enter) to select the default value 2.
You receive the following message:
Interrupt number <number selected> will be used for TR boards. Press <Enter> to confirm or any other key to reject.
Press (Enter) again. The system displays the following message:
Moving files for IVPSS Software!
It will take a few minutes!
■Monitor Type
—The system displays
Select the monitor type:
1.Color (AT386)
2.Monochrome
Enter selection:
If you do not know the type of monitor you are using, refer to the documentation provided with the monitor. Only those listed above are currently supported
by AT&T.
—Type your selection and press (Enter). You receive the following message:
Confirm: You are using monitor type (selected number) [y/n]
