Software Installation

5.Remove the last disk from the disk drive.

An installation confirmation message appears.

Installation of the AUDIX Voice Power Application Software 2.1.1: Speech is now complete.

6.At the # prompt, type installpkg and press (Enter). For systems with an installed tape drive:

— The system displays

Please indicate the installation. medium you intend to use.

Strike C to install from CARTRIDGE TAPE or F to install from FLOPPY DISKETTE.

Strike ESC to stop.

Type f.

For systems with more than one floppy disk drive:

— The system displays

This system has two floppy drives. Strike ENTER to install from drive 0 or 1 to install from drive 1.

Type 1 and press (Enter) to select drive 1, or just press (Enter) to select drive 0.

N O T E :

If the system configuration includes a tape drive or multiple floppy disk drives, additional prompts may appear. Use the preceding steps as a guide to responding to the system prompts. The actual prompts may vary depending on the system configuration.

3-31

Page 117
Image 117
AT&T 2.1.1 manual Please indicate the installation. medium you intend to use