5.Grasp the edge of the NEC VersaBay IV device and pull the device out of the system.

Removing a device from the VersaBay IV slot

Always install the weight-saving module that ships with your system in the VersaBay IV slot if no VersaBay IV device is installed in the slot. See “Installing a Device in the NEC VersaBay IV Slot” for instructions on installing the module.

Installing a Device in the NEC VersaBay IV Slot

Use the following steps to install a device in the NEC VersaBay IV slot.

1.Use the Phoenix BaySwap utility or power off the system.

2.Remove the VersaBay IV device or weight-saving module from VersaBay IV slot.

3.Align the device in the NEC VersaBay IV slot and push it in until it fits securely into the bay.

5-6 Using the System Drives and Bays

Page 100
Image 100
NEC L320 manual Installing a Device in the NEC VersaBay IV Slot, Removing a device from the VersaBay IV slot