4.Remove the device (see the section, “Removing a Device from the NEC Modular Bay Slot” or “Removing a Device from the NEC VersaBay IV Slot). Click OK after the device is removed.
5.Insert a different device in the NEC VersaBay IV slot or the NEC Modular Bay slot (see “Installing a Device in the NEC Modular Bay Slot” or “Installing a Device in the NEC VersaBay IV Slot”).
References to the drive letter listed under My Computer and the Windows Explorer change automatically when the device is swapped or removed. The balloon message that appears when you move your cursor over the taskbar icon also changes to reflect the new VersaBay IV or Modular Bay status.
Removing a Device from the NEC Modular Bay Slot
Use the following steps to remove a device from the NEC Modular Bay slot.
1.Use the Phoenix BaySwap utility or power off the system.
2.Locate the NEC Modular Bay release latch to the left of the Modular Bay slot.
Locating NEC Modular Bay features
A – NEC Modular Bay Device | C – Pull tab |
B – Modular Bay Release Latch |
|
3.Slide the latch to the left and hold it. Grasp the pull tab on the device and remove the device from the system.
Always install the