2.Enter up to 5 button strokes for the password. Multiple buttons held down at the same time represent a unique entry, independent of individual button strokes.
3.Press the Enter button to set the password.
Note The personal code can be up to 5 button strokes. Multiple buttons held down at the same time represent a unique entry (independent of individual button strokes) — allowing close to 800,000 personal code combinations.
Clearing a Personal Code
TFollow these steps to clear a personal code.
To clear a User personal code:
—Log on as the User with the personal code you want to change.
—Press the 3 button and the Enter button at the same time and hold both down for at least 5 seconds.
—Enter the personal code to be cleared and press the Enter button.
Note A User personal code can be cleared by the Supervisor, without the SupervisorTknowing the User personal code.
To clear a Supervisor personal code:
—Log on as the Supervisor.
—Press the 4 button and the Enter button at the same time and hold both down for at least 5 seconds.
T— Enter the personal code to be cleared and press the Enter button. To set a new personal code, see “Establishing a Personal Code.”
When the Supervisor or User personal code is being cleared or reset, the Security LED flashes.
Note If you forget your password (personal code), contact NEC Computers Support Services for information about clearing it. See Chapter 11, “Getting Service and Support,” for contact information.
