2.Plug one end of the AC power cable into the AC adapter and the other end into a properly grounded 120- or 240-volt, 50- or 60-Hz wall outlet.

Connecting the AC adapter

Do not cover or place objects on the AC adapter. Keeping the adapter clear of objects lets the adapter cool properly during use.

Only use the AC adapter that comes with your NEC Versa L320. Although other adapters look similar, using them can damage your system.

Powering On Your System

Power on the system as follows.

1.Locate the latch on the front of the LCD panel, slide it to the right, and raise the panel.

2.Locate the Power button and press it to turn on system power. For additional information about Power control buttons and power LEDs, refer to Chapter 1, “Introducing the NEC Versa.”

Getting Started 2-5

Page 33
Image 33
NEC L320 manual Powering On Your System, Connecting the AC adapter