Note If the NEC Customize icon is not available, double click My Computer on the desktop and then click the CD icon. The Application and Driver CD dialog box appears.
Application and Driver CD Dialog Box
he Application and Driver CD dialog box consists of the following components.
Selection Tabs — Located just below the title bar, each tab represents a software category. The selection tabs include applications, drivers, utilities, internet browsers, and the NEC Online Documentation.
Description — Located in the bottom portion of the dialog box, the text describes the selected or highlighted software category or application, driver, etc.
Install — Clicking the Install button installs the selected software.
View — Clicking the View button displays installation instructions for those
Tutilities that are not installed using the A&D CD utility.
Exit — Clicking the Exit button closes the Application and Driver CD dialog box.
Installing the A&D CD Software
Once the Application and Driver CD dialog box appears, follow these steps to install the desired software.
1.Click the selection tab of your choice.
2.Click the desired application, driver, or utility.
3.Click the Install button to install your selection.
Follow the
4.Click Exit to close the Application and Driver CD dialog box.
5.Remove the CD from the
Personal Code Setting Utility
Use the Personal Code Setting utility along with the personal code buttons on the NEC Versa L320 (available on some systems) to set a personal code and secure the system. Once the personal code is set, the system will not boot until you enter the personal code.
The personal code must also be entered if the system goes into a
