2.Turn the system over and locate the screw on the memory bay cover.

Memory bay cover and screw

A – Memory Bay Cover

B – Screw

3.Remove the screw and lift off the memory bay cover.

4.If you need to remove a module for the upgrade, remove it as follows (see the following figure).

Before handling any internal components, discharge static electricity from yourself and your clothing by touching a nearby unpainted metal surface.

Press the locking tabs away from the sides of the module until the module

Tpops up at an angle.

Pull the memory module out of the slot along the angle.

Using the System Drives and Bays 5-13

Page 107
Image 107
NEC L320 manual Memory bay cover and screw