NEC L320 manual Shortcut Buttons, Status LEDs, Control panel LEDs

TUse the Power button in the following ways:

—Press the Power button to power on.

—Press the Power button to resume from a Windows 98 or Windows 2000 Standby mode and proceed with normal operation.

—Hold the Power button in place for 4 or more seconds to initiate power override (powers off the system). Only use this option if you cannot power off your system using Start, Shutdown.

Shortcut Buttons

Some systems have shortcut buttons that you can configure to launch your default Internet browser and your default e-mail application. See “One-Touch Start Button Settings Utility” in Chapter 4 for information about configuring the buttons.

Status LEDs

The NEC Versa L320 system uses status lights marked with icons to communicate power status and operating status. Most of these LEDs are on the control panel (see the following figure). See the following sections for information about each LED.

Control panel LEDs

A – Power LED	F – Caps Lock LED
B – Battery Status LED	G – Scroll Lock LED
C – E-mail Notification LED	H – Num Lock LED
D – Drive Activity LED	I – Security Indicator LED
E – NEC Modular Bay Drive Activity LED

Introducing the NEC Versa 1-7