Lanzar Car Audio Lanzar Equalizer Manual: Operation and Features Overview

owner’s manual operation

E750S

equalizer with subwoofer crossover

Control/Connector Function

1LED Level Display

2Equalizer Controls

3Power Indicator LED

4Fader Control

5Subwoofer Frequency Control

6Subwoofer Boost Control

7Line Channel Inputs

8Power Connection

9Front, 10 Rear &

11Subwoofer Outputs

These rows of LEDs display the Preamp Output Level. Left and right \channels are displayed independently at peak levels.

This seven-band equalizer’s rotary controls give you control over musical frequency ranges.

This LED is illuminated when the unit is properly powered, grounded and the remote power has been turned on.

•In a 2 Amplifier, 4 Speaker system, rotating the knob to the FRONT side increases the level of the front speakers; rotating to the REAR side increase level of the rear speakers. At mid position, both sets of speakers are at maximum level.

•In a 2 Speaker system, the fader control should be rotated to the position which provides highest levels for both sets of speakers.

Lets you adjust the subwoofer frequency and crossover point from 40-400 Hz.

Lets you adjust the subwoofer boost level from a 0 to +10dB increase.

RCA cables are used to connect the front input signal from head unit or other source.

Connect to power source as follows:

+12: Connect a red wire of at least 12 gauge to the car battery or other power source.

GROUND: Connect a black wire of at least 12 gauge to car chassis for ground connection

REMOTE: Connect an orange wire to remote activating (12V DC) wire of car stereo or other head unit.

RCA cables are used to connect the front channel outputs to the front channel amplifier inputs, the rear channel outputs to the rear channel amplifier inputs, and the sub outputs to the subwoofer amplifier inputs.

9