owner’s manual operation
preamp equalizer
Control/Connector Function
1LED Level Display
2Power Indicator LED
3Equalizer Controls
4Volume Control
5Fader Control
6Line Channel Inputs
7Power Connection
8Front Channel Outputs
9Rear Channel Outputs
These rows of LEDs display the Preamp Output Level. Left and right \channels are displayed independently at peak levels.
This LED is illuminated when the unit is properly powered, grounded and the remote power has been turned on.
This
Allows adjustment of sound level for particular program material or source.
•In a 2 Amplifier, 4 Speaker system, rotating the knob to the FRONT side increases the level of the front speakers; rotating to the REAR side increase level of the rear speakers. At mid position, both sets of speakers are at maximum level
•In a 2 Speaker system, the fader control should be rotated to the position which provides highest levels for both sets of speakers.
RCA cables are used to connect the front input signal from head unit or other source.
Connect to power source as follows:
+12: Connect a red wire of at least 12 gauge to the car battery or other power source.
GROUND: Connect a black wire of at least 12 gauge to car chassis for ground connection
REMOTE: Connect an orange wire to remote activating (12V DC) wire of car stereo or other head unit.
RCA cables are used to connect the front channel ouputs to the front channel amplifier inputs.
RCA cables are used to connect the rear channel ouputs to the rear channel amplifier inputs.
5
