AT&T 2.1.1 manual Introduction, Preassembled Systems

Introduction

This AT&T AUDIX™ Voice Power/installation and Maintenance Guide includes procedures for installing and maintaining new AUDIX Voice Power systems and for upgrading from existing AUDIX Voice Power Release 1.1 and Release 2.0 systems to Release 2.1.1. Technical personnel at customer sites and AT&T Service Technicians should use this document as a guide for system installation and as a reference for system maintenance.

Preassembled Systems

The AUDIX Voice Power system includes an 80386-based microprocessor. You must install add-in circuit boards and separate software. AT&T may install and test the additional circuit boards and software before it ships the system to the customer site. If your system has been preassembled, you can skip the instructions for installing circuit boards and memory at the beginning of Chapter 2 and proceed directly to the instructions for Connecting Peripherals and Cables later in Chapter 2. Similarly, if your system has been preconfigured, you can skip the instructions for installing basic software given at the beginning of Chapter 3 and proceed directly to the instructions for Competing Installation and Acceptance Testing later in Chapter 3. You should then continue with the Hardware Verification section of Chapter 4.

1-1