Upgrade Procedures
Upgrading from Release 2.0 to
Release 2.1.1
The procedure for upgrading AUDIX Voice Power Release 2.0 to Release 2.1.1 is outlined below. The exact procedure for each step is included in the step or described elsewhere, either in this chapter or in other parts of this document.
Since you are upgrading to AUDIX Voice Power 2.1.1, you have to add additional memory to bring the total system memory capacity to 8 MB. To install additional memory, follow the instructions for the appropriate 6386 system in installing Additional Memory in Chapter 2, Hardware Installation.
CAUTION:
Files that have been backed up using Release 2.0 cannot be restored once the system has been upgraded to Release 2.1.1.
To restore files backed up using Release 2.0 to an upgraded AUDIX Voice Power 2.1.1 system, you must first remove the AUDIX Voice Power 2.1.1 application software. Then you restore the files and reinstall AUDIX Voice Power 2.1.1 application software. This automatically upgrades the files to AUDIX Voice Power 2.1.1 format.
1.Using FORM A from the AT&T AUDIX™ Voice Power Planning Guide and Forms (Release 2.1. 1), record the current Service Type and Extension for each channel. To determine the current Service Type and Extension, you must display the Voice Equipment window, as described in the chapter Assigning Services to Channels in your Switch Notes document. For each channel, write down the Service Type (the Service field on the Voice Equipment window). After the upgrade is complete, you reassign Service Types and Extensions to all channels.
