Software Installation
3
This chapter explains how to install all software necessary for the operation of AUDIX Voice Power. AUDIX Voice Power can be installed on either a dedicated computer, or on a computer that is also used for controlling the telephone switch (Integrated Solution II environment). The installation procedures are different. Please see the Switch Notes for your telephone system to determine which procedure to use.
NOTE:
■Procedures in this section that reference the UNIX command installpkg are written for a machine with one floppy disk drive. Additional steps, as indicated by the system, may be required for machines with additional drives.
■For upgrade procedures, see Chapter 5, Upgrade Procedures.
■See Appendix A for information about installing a second hard disk.
