Software Installation
—Type 1 and press (Enter) to select drive 1, or just press (Enter) to select drive 0.
N O T E :
If the system configuration includes a tape drive or multiple floppy disk drives, additional prompts may appear. Use the preceding steps as a guide to responding to the system prompts. The actual prompts may vary depending on the system configuration.
3.Insert disk 1 of the Integrated Voice Power System software into the disk drive and press (Enter).
4.After the system reads the last disk in the Integrated Voice Power R2.0 system software set, it prompts you for the following information:
■Serial Ports
— The system displays
First serial port uses interrupt level 4
Second serial port uses interrupt level 3
Parallel port uses interrupt level 7.
If you wish to reclaim some of these interrupts for other devices, you may DISABLE some of these ports. However, at least ONE serial port must be enabled at all times.
