Upgrade Procedures
13.Install AUDIX Voice Power, Release 2.0. This automatically upgrades the AUDIX Voice Power Release 1.1 database to a Release 2.0 compatible database.
To install the AUDIX Voice Power Application software, follow these steps:
a.Log in as root (if not already logged in).
b.At the # prompt, type installpkg and press (Enter).
For systems with an installed tape drive:
— The system displays
Please indicate the installation medium you intend to use. Strike C to install from CARTRIDGE TAPE or F to install from FLOPPY disk. Strike ESC to stop.
— Type f.
For systems with more than one floppy disk drive:
— The system displays
This system has two floppy drives. Strike ENTER to install from drive 0 or 1 to install from drive 1.
—Type 1 and press(Enter) to select drive 1, or just press (Enter) to select drive 0.
N O T E :
If the system configuration includes a tape drive or multiple floppy disk drives, additional prompts may appear. Use the preceding steps as a guide to responding to the system prompts. The actual prompts may vary depending on the system configuration.
c . Insert disk 1 of the AUDIX Voice Power Application software 2.0 into the floppy disk drive and press (Enter).
